Innovate-motorsports TC-4 Manual do Utilizador descarregar pdf (Página 8)

- 8 -

5.3 16-Channel Log-Chain example

The example chain consists of a LM-1/LMA-2, a LC-1, a TC-4, a LMA-3 and 2 XD-1’s. In this

case the chain has 16 channels (6 from LM-1, 1 from LC-1, 4 from the TC-4 and 5 from the LMA-

3).

Devices attached to the LM-1’s analog input count as being part of the LM-1’s 6 channels. They

don’t count extra. XD-1’s do not contribute any channels, so you can add as many as needed.

6. Programming the TC-4 with LM Programmer

To connect the TC-4 for programming follow these steps:

1. Disconnect any MTS device from the IN port.

2. Connect the 2.5mm to DB 2 computer interface cable into the Serial OUT port. Your

computer needs a serial port. If it does not have one, you will need a USB to serial

adapter.

3. Power the TC-4 either from 12V or a 9V Battery (when using a desktop computer).

4. Start the LM Programmer application

The following screen will show up:

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Innovate-motorsports TC-4 Manual do Utilizador Página 8