Innovate-motorsports XD-16 Manual do Utilizador Página 1

XD-16_Manual_1.4.doc XD-16 Digital Universal Dash Display User Manual

- 10 - XD-16 can display the RPM in multiples of 10 RPM. If a channel is selected that has both positive and negative values, a different screen wi

- 11 - Programming the Min or Max hold function should be pretty self evident. You can enable the function. You can also make the hold function de

- 12 - Again, the programming is very similar to the Min/Max hold programming as described in 4.6. Except here the Alarm condition can be programm

- 13 - 5.7. Programming the Analog ‘needle’ colors Click on the Colors tab. This shows the current color settings for all the 21 LEDs plus the

- 14 - 6. Changing the gauge face of the XD-16 When you use the XD-16 to display different channels than AFR or Lambda, you very likely want to ch

- 15 - 6.2. Create a custom label Note: To customize you will need to use a blank white gauge face (supplied with every XD-16). Innovate Motorspo

- 16 - Appendix B: Kit Contents Standalone Gauge Kit (P/N: 3781) - As Shown below XD-16 Kit (P/N: 3780) – Excludes LC-1, Sensor (P/N: 3737), and Bu

- 17 - Appendix C: Limited Warranty LIMITED WARRANTY Innovate stands behind the quality of its products. Innovate makes the following warranty to

- 18 - Revision History 1.0 – 2/5/05 Initial release 1.1- 3/16/05 Corrected misc. errata. 1.2- 4/11/05 Corrected section 2.2 1.3 – 2/06/06 Added

- 2 - 1. Overview...

- 3 - 1. Overview The XD-16 is a programmable digital display used as dash mounted instrument for the Innovate Motorsports sensor devices. The XD-1

- 4 - 2.1. Identifying the user interface features of the XD-16 The analog pointer LED’s (21 total) act as a digital needle. The range and individu

- 5 - 4. Using the XD-16 When the XD-16 powers up it will briefly go through a sequence where it lights up all its LEDs. This is a function and dia

- 6 - Press and hold the Control button until for Reset shows. 4.9. Review Min/Max hold Press the Control button twice rapidly. The XD-16 will

- 7 - The following items will be installed on your hard-drive 1. LM Programmer This is used to program the XD-16 2. LogWorks This is a comprehens

- 8 - Click the 'Update Firmware' in the main page to upgrade to the latest firmware for the LC-1. Firmware for the LC-1 has the extension

- 9 - 5.4. Selecting the display channel 1. Prior to selecting a channel to be displayed you must first tell the system what channels are availabl