Innovate-motorsports MTX-L Manual do Utilizador descarregar pdf (Página 9)

3.1 Installing software

1. Double click on the Logworks 3 installer previously downloaded.

2. The installer will start, follow the prompts to install the software.

3. Once the software has been installed the LogWorks software, LM

Programmer and MTX-L manual can then be located by navigating

through Start->Programs->LogWorks3.

3.2 Connecting to LM Programmer

LM Programmer is used to update firmware, change fuel types, and program

the two analog outputs.

1. Connect the OUT port of the MTX-L to the provided serial

programming cable. Connect the other end of the serial

programming cable to your computer. If your computer does not

have a serial port, you can purchase a USB to Serial adapter from

Innovate Motorsports (P/N 3733) or use any USB to serial adaptor

that includes drivers. Make sure that nothing is connected to the IN

port of the MTX-L

2. Power up the MTX-L.

3. Launch LM Programmer. The LM Programmer application can be

launched from Start->Programs->LogWorks3->LM Programmer from

the Windows task bar.

3.2.1 Analog Outputs

1. Connect the MTX-L to the computer and launch LM Programmer.

2. Select one of the Analog output tabs. The Analog output tab looks

like this:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Innovate-motorsports MTX-L Manual do Utilizador Página 9